Amp two is the second member of the Bottom Line combo bass amps. Based on Amp one, but with more defined speaker-system and more power. A 12“ neodymium woofer for quick and full bass response combined with a 4“ mid-high direct radiating speaker for gentle trebles allows a wider range of sounds from funk to pop, rock and jazz.

In further difference to the Amp one the signal path is lead trough adjustable compression pre EQ- to provide even more dynamic headroom.


Model: Amp two (AP2)
Single-input, bass combo amplifier, 240 watt
Input: 6.3 mm (1/4”) input jack socket as high impedance
line input stage with pad (high/
low attenuation) and gain control
EQ: bass ± 8 dB / 80 Hz
middle ± 15 dB / 200…2000 Hz (adjustable)
treble ± 12 dB / 6 kHz
bass boost + 10 dB / 55 Hz
colour -1 db / 300 Hz, + 8 db / 3,7 kHz
Tone balance: the tone balance enables the bass- or treble
emphasis or a combination of both
Compressor: 1 mV… 350 mV at instrument input
ratio = 1:1… 10:1
Power amp: 200 W/8 ohms,
discrete bipolar transistor design
Speaker system: 12“ (300 mm) woofer, neodymium magnet,
bass reflex enclosure, 4“ (100 mm) mid-high
direct-radiation speaker
Features: adjustable DI-out, lineout, headphones,
tuner, sub-out, effect loop
footswitch: input muting, effect loop on/off
Accessories: padded gigbag
Cabinet: 0.7“ (18 mm) birch plywood
Finish:
waterbased acrylic, black spatter finish
Dimensions:
500 mm x 420 mm x 350 mm
(19.7“ x 16.5“x 13.8“), HxWxD
Weight: 23,5 kg (51.7 lbs)